Dark Mode Light Mode
Giving Edge AI the Ability to Act in Real Time
STMicroelectronics Introduces 600V Three-Phase Gate Drivers for Motor Control

STMicroelectronics Introduces 600V Three-Phase Gate Drivers for Motor Control

STMicroelectronics has expanded its STDRIVE family with two 600V three-phase gate drivers designed for motor drives and inverter applications operating directly from a high-voltage bus. The new STDRIVE631P and STDRIVE631N integrate three half-bridge drivers into a compact SO-28 package, targeting applications such as fans, pumps, and compressors in household appliances.

Both devices support N-channel power MOSFETs and IGBTs and are manufactured using ST’s BCD6-OFFLINE technology. The gate drivers provide 1.0A source and 0.85A sink current capability, with matched propagation delays across all channels. They also integrate zero-drop bootstrap diodes, reducing the number of external components needed for high-side driving.

The primary difference between the two devices is their input logic configuration. The STDRIVE631P uses active-high inputs, while the STDRIVE631N uses active-low inputs, allowing developers to select the configuration that best matches their motor-control architecture.

Both gate drivers incorporate several protection functions intended to improve inverter reliability. An integrated comparator with smart shutdown supports fault management, while interlocking and deadtime control help prevent cross-conduction between high-side and low-side switches. Undervoltage lockout (UVLO) is included for both driving sections to prevent operation under insufficient supply conditions.

The devices also provide immunity to dV/dt transients of ±50V/ns and withstand electrostatic discharge events up to 2kV under the human body model. ST’s BCD6-OFFLINE technology provides tolerance to below-ground voltage spikes of up to 100V.

By integrating the bootstrap diodes and protection circuitry, the STDRIVE631P and STDRIVE631N can simplify PCB layout and reduce the bill of materials compared with discrete gate-driver implementations. Each channel has a dedicated input, and a separate enable pin supports low-power shutdown.

For development and evaluation, ST offers the EVLSTDRIVE631P and EVLSTDRIVE631N boards. Each includes a complete three-phase inverter built around STGD6M65DF2 IGBTs, with selectable single-shunt or three-shunt current sensing. A 34-pin motor-control connector provides an interface to STM32 microcontrollers, supporting development of field-oriented control (FOC) and six-step motor-control applications.

The STDRIVE631P and STDRIVE631N are currently in production in SO-28 packages, with an operating temperature range of -40°C to +125°C. Pricing starts at $1.49 each in quantities of 1,000.

Additional technical information is available on the STDRIVE631P and STDRIVE631N product pages. Both evaluation boards are available through ST’s eStore.

Previous Post

Giving Edge AI the Ability to Act in Real Time