Hyperstone Presents at the Flash Memory Summit 2019
At this year’s Flash Memory Summit, Hyperstone has been invited to present twice in both the Embedded Applications and Drive Design sessions of the conference at the Santa Clara Convention Center. The conference takes place between the 5th and 8th of August 2019.
The presentations held by Dr. Jan Peter Berns, Managing Director of Hyperstone and Axel Mehnert, VP of Marketing and Product Strategy will share insights on ‘Designing Reliable Flash Storage Systems’ and ‘Using SSD Performance Numbers Effectively’. Abstracts and session information are as follows.
Using SSD Performance Numbers Effectively
EMBD-101B-1: Embedded Applications, Part 2 – Applications | 08/06/2019 9:45AM
Speaker: Dr. Jan Peter Berns, Managing Director
Most engineers look at the performance numbers first when examining an SSD datasheet. But what do those numbers actually mean in practice? While most have understood the difference between read- and write-, sequential- and random-performance in MB/s and IOPS, not everyone is aware how these figures vary over the drive’s lifetime and depending on different use-cases. It’s valuable to understand what and how different factors and mechanisms influence performance in SSDs.
Designing Reliable Flash Storage Systems
EMBD-101-A-1: Embedded Applications, Part 1 – Drive Design | 08/06/2019 8:30AM
Speaker: Axel Mehnert, VP Marketing & Product Strategy
Achieving the highest reliability in flash storage has many aspects. Implementing an error correction algorithm capable of soft-decoding and with a guaranteed error floor is only one issue. Continuous calibration of the readout-levels of the memory cells during operation is just as crucial. The firmware responsible for all flash management tasks must balance the wear and performing scan-reads of the stored data. Designers may want to take a holistic approach to achieve the lowest possible error rates and maximize endurance.